Isolation in bathrooms
There is a lot of humidity in the bathrooms. Steam comes from all water sources in the shower and bath area, and this humidity is settled on the wall and the floor. Even small problems like the overflow of the bathtub can cause a large amount of moisture to be released. In these showers, water is not kept in the shower, but directly to the main expense of the building.

Difficulty: Preventing damages caused by moisture in the roof

Many people think ceramic floors are leakproof, but this is only partially true. From the joints, the water on the floor can leak.





Result:
Damage that may occur due to moisture in your building if you do not take precautions with proper insulation.





Solution: Combination insulation of ceramic floor
Combined insulation should be used in this area since bituminous insulation can be done with ceramics effortlessly.

As an example, more sliding type insulations should be preferred. Because sliding-based insulation forms a fast and secure insulation layer under the ceramic.

If the surface is not suitable for ceramic floors, then additional treatments and insulation measures are often required.

For example, it is very easy to create a double-component sliding insulation material, stone, wood or metal, or a floor ready to be laid on mixed or old floors in refurbishment. After forming the insulation layer on these types of floors, necessary screed, flooring, coating processes can be done easily.